What Tools Do You Need To Change Brakes

When a brake pad wears down on a rotor it will often make a squeaking sound when applied.

What tools do you need to change brakes. You can use the same brake pads that you had before or you can buy new ones if they need to be replaced. If you re changing brake pads as well now s the time where you install new brake pads. If you re working on front disc brakes you ll need brake pads with noise reduction shims a hardware kit with new anti rattle clips brake pad spreader clips if your car came with them new caliper slide pins if yours show any signs of corrosion and a tube of high temperature brake grease to lubricate the caliper pins and the underside. When you find it s time to replace your drum brake shoes brake drums or parking brake components carid has the parts and tools you ll need to perform the job yourself.

Once the drum is removed a t handle brake shoe spring removal tool for american vehicles with big springs will make easy work of getting the shoes off. Slide the ends of the brake pad into the slots on the top and bottom parts of the bracket until it contacts the brake rotor. Brake pad lining is a friction material that wears every time the brake pedal is depressed. This is an audible safety measure to make sure that the driver knows to change the brakes soon.

The tools for fixing brakes especially the ones used for changing your brake pads are not hard to use in fact they can typically be found at any hardware store or auto parts shop. If you re looking to replace your brake pads chances are you ve begun to hear a high pitched squealing noise when you apply the brakes. This article contains a list of tools that you typically need to replace brake pads and rotors. You don t need to go and buy all these tools because you most likely already have.

Replacing the brake pads and rotors is a do it yourself project that you can complete yourself in a couple of hours as long as you have the right tools. Here are tools that you will find handy when doing a brake job. If you disconnected the brake hose to change the brake calipers then you need this tool to make sure no air is trapped in the hydraulic lines. You may need to compress the caliper piston in order for the caliper to slide back on the rotor.

This is their way of telling you that the brake linings are due for replacement. On the list of tools needed to change brakes a brake bleeder wrench may or may not be needed depending on the job. Slide the brake pads onto the front and back of the caliper bracket.